Jupiter equal pressure system

The system is suitable for all kinds of animals.
Jupiter is a equal pressure system with exhaust through the roof or the wall, and air inlet through the roof or from the loft.

Jupiter operates as equal pressure, but can also operate as a combination for instance as negative pressure in the winter. Jupiter operates independently of the pressure from the wind.

The parts for the system

Air inlet 

Coanda air inlet 600 or 800 with air intake through the roof or

Coanda air inlet 600 or 800 with air intake from the loft.

Exhaust

TU 800 or TU 600 to install in the roof or

wall exhaust 800 or 600.

can be supplemented with gable end fan.

Fan

in Coanda air inlet and exhaust. The capacity is dependent on the number and kind of animals.

Motor regulator

A MR9710 motor regulator is used to adjust the inlets.

Controls

FarmMaster/FarmCenter (are used for all types of stables)

Damper controls

Linak Actuator and TSN1

Oil hydromat 

Neptronic (when a few inlets and exhausts)

Functions.

The system always operates with an equal pressure and will typically be suitable for stables for free range birds that don't accept draugth in the opening. The air will completely stagnate in doorways and in openings.
Jupiter operates as a combination of negative- and equal pressure, for instance you can disconnect the fans in the inlet if there is no need for the equal pressure function.

FarmCenter + FarmMaster

If the plant is controlled by FarmCenter + FarmMaster, the wall inlets can be regulated according to a combination of pressure, temperature and humidity.
Extraction can be regulated both by an infinitely variable system and by a step system.
The control unit can register water and feed consumption, as well as regulate a cooling and automatic spray system. It can communicate with a PC via Mux or Communicator.

The dampers in the exhaust and the Star diffusors are each controlled of a damper motor to achieve the requested pressure, typically 0 Pa. inside the stable.

Jupiter advantages

*  Exhaust up to 800 mm with high capacity.
*  Roof exhaust and air inlet in black or grey polyethylene.
*  Air inlet with a diameter of 600 or 800 mm.
*  Materials which are easy to clean, stands up to high pressure cleaning.
*  Separate controlling of the dampers in the exhaust and the diffusors in the inlets.
*  Separate controlling of revolutions of the fan in the air inlet.
*  Emergency opening of all types.
*  Operates independently on the pressure from the wind.

Related products

Coanda air inlet 600 and 800 with air intake through the roof

Coanda air inlet 600 and 800 with air intake from the loft

Exhaust TU 600/TU 800 installed in the roof

Exhaust TU 600/TU 800 installed in the wall

FarmMaster/FarmCenter

Linak LA12P Actuator

Linak LA32P Actuator

Oil hydromat

Neptronic